Color: 1 Pack
KEY FEATURES -KastKing Patented V15 Vertical Fishing Rod Holder Stores up to 15 fishing rods or fishing rod and reel combos in less than 18” of wall space – Innovative Patented Design (U.S. Patent No.7,237,685) fishing pole holder is easy to use – Easy installation with only 3 screws. Affordable Innovation.
STORE 15 RODS OR COMBOS – The KastKing V15 vertical fishing rod rack can store up to 15 rods or combos in less than 18 inches of horizontal wall space. Most other brands only store 6 combos in the same amount of space. Rods and combos can be mounted virtually anywhere along the length of the rod, permitting reels to be staggered at different heights for minimum storage space.
INNOVATIVE DESIGN – This innovative fishing pole rack is simple and easy to use. Simply push the rod firmly into either the large or small v-grooves until the polymer grip material grabs the rod. For additional stability, hang the rod with the thread wrapped line guides just above the v-groove. The tapered v-grooves can accommodate up to a ½” diameter rod with a reel attached. To remove your combo from the fishing rod rack simply grab the rod near the rod rack and pull straight out.
DURABLE MATERIAL – The KastKing V15 fishing rod holder is molded with tough amorphous polymer material which is resistant to heat, chemicals, and impact. The v-grooves are co-injected with a tacky thermoplastic polymer material to ensure rods and combos are held securely in your rack and doesn’t damage or mar your rods.
SIMPLE INSTALLATION – KastKing V15 fishing pole racks have 3 mounting holes. 2 outside holes are 16” on center for secure installation on standard-spaced wall studs. To install the rack, determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, install anchor for center mounting hole, re-level rod rack, install and tighten all screws. The KastKing V15 fishing rod rack will organize your fishing gear and save space.
-“I have a problem storing all my rods in the limited space I have and height of my garage. I ordered the V15 to try and was able to put all my rods safety and secure in an area of 16”. The V have a strong rubber stuff that grips the rod. Definitely thinking of ordering a another one.”
-“First time buying a rod holder as I just bought my first couple nicer rods and needed to organize. I installed this perfectly in about the time it took me to grab my impact drill and sink the three screws provided in the wall and I used one of the three drywall anchors included for middle whole. The two side holes are spaced perfectly 16 in apart and sunk directly into the studs in the wall. This is a solid plastic KastKing branded rack with silicon grip that come in a compact V shape and alternating U shaped slots for thicker rods. This seems to be a product that is made to last and looks very sharp on the wall holding some gear.”
-“Firstly, it’s very easy to install compared to 2-piece systems. Since it hangs vertically, there’s not really a need for 2 pieces. The grips are great. There are 2 sizes of grips and both hold various sizes of rods easily. I have 10 rods/reels and there was plenty of space. All fit just fine. I highly recommend.”